BOSCH/PA PLM-4P125

The PLM-4Px2x PLENA matrix Amplifiers are built to perform. Designed to be reliable, cost effective, multi channel amplifiers; they are suitable for almost any application that demands high quality audio and flexible control.
The built-in DSP processor is packed with powerful features. The loudspeaker library will allow the easy tuning of Bosch/EV/Dynacord loudspeakers. Equipped with “Amp Link”, combining both the PLM-4Px2x amplifiers with the PLM-8M8 8 Channel DSP Matrix Mixer couldn’t be easier.
Some typical application include: Shopping centres, schools, restaurants, bars, nightclubs, gyms, recreational facilities, churches, warehouses, office buildings, regional airports, train stations, bus terminals, boardrooms, meeting rooms, conference facilities, small theme parks, museums, back of house performing arts centres and sports stadia.

Main Features:
- 4-channel, Class D power amplifier
- 100/70V & 8/4 ohm outputs
- Complete loudspeaker processing DSP with input mixing; controlled by PC GUI and iOS app
- Amp Link to connect easily with PLM-8M8
- Environmentally friendly auto standby mode

Technical Specifications:

Power supply
• Nominal input voltage 100 - 240 VAC ±10%, 50/60 Hz
• Power consumption (-6dB/idle/standby): 254 W / 27 W / 6 W

Performance
• Rated outputs voltage/impedance 100 V / 70 V / 8 ohm / 4 ohm
• Rated output power per channel: 130 W
• Rated output power Bridged (CH 1-2 / 3-4): 250 W
• THD+N (1 kHz, 6 dBFS): 0.1 %
• Dynamic Range: >101dB
• Frequency Response: 65 Hz to 20 kHz (+0/-3dB)
• Crosstalk @ 1 kHz <-70dB

Connectors
• Inputs (wired in parallel): 4x 3-pin XLR balanced; 4x 3-pole balanced Phoenix, 1x RJ45 (Amp Link)
• Loudspeaker output 4x 3-pole balanced Phoenix,
• Logic and standby overide 2-pole Phoenix
• Ethernet Network 10/100 Mbps RJ45
• 12 V output power for motion sensor 2-pole Phoenix

• Dimensions (HxWxD): 90x440x417mm, (19" wide, 2RU high)
• Weight: approx. 15 kg