DYNACORD C3600FDI

DSP power amplifier 2x1800W, for Installation Fully integrated professional speaker processing with FIR Drive technology Market leading acoustic performance and rock solid reliability Low Z and 70/100V operation and power saving standby mode Intuitive system control software, makes setup and control easy Maximum Output Power, Bridged Load Impedance: 4 ohm=6000 W; 8ohm=3400 W; High Impedance: Not Recommended Maximum RMS Voltage Swing, THD = 1%, 1kHz 90.6V Voltage Gain ref.1kHz 32.0dB IMD-SMPTE, 60 Hz, 7 kHz <0.1% DIM 30 <0.05% (3.15 kHz, 15 kHz) Maximum Input Level +21 dBu Crosstalk < -80dB (ref. 1 kHz, at 100 W/4 ohm) Frequency Response 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced 20kohm Signal-to-Noise Ratio (A-weighted) >109dB Output Noise , A-weighted <-68dBu Output Stage Topology Class H Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption 850 W (1/8 Maximum Output Power @4ohm) Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling Front-to-rear, 3-stage-fans Safety Class I Available Color Black Height 88mm (3.46") Width 483mm (19.02") Depth 462.4mm (18.2") Weight Net 18.2kg (40.12 lbs) Signal Processing FIR Filters, Audio Limiters Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance High Impedance Operation 70V Operation & 100V Operation Mains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH Operating Temperature Range +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion <0.05% (at 1200 W/4 ohm MBW = 80 kHz, 1 kHz)