DYNACORD C1300FDI

Fully integrated professional speaker processing with FIR Drive technology Market leading acoustic performance and rock solid reliability Low Z and 70/100V operation and power saving standby mode Intuitive system control software, makes setup and control easy Load Impedance 2, 2.6, 4, 8 ohm Maximum Output Power, SIngle Channel 2 ohm:1100W; 2.6ohm: 950W; 4ohm: 660W; 8ohm: 350W (Load Impedance) Maximum Output Power, Dual Channel 2ohm:1000W; 2.6ohm: 850W; 4ohm: 600W; 8ohm: 320W (Load Impedance) More Specifications Maximum Output Power, Bridged High Impedance: 2 ohm & 2.6 ohm=1x 600W; Load Impedance: 4 ohm=2000W; 8 ohm=1200W; Maximum RMS Voltage Swing, THD = 1%, 1kHz 55.3V Voltage Gain ref.1kHz 32.0dB IMD-SMPTE, 60 Hz, 7 kHz < 0.1% DIM 30 < 0.05% (3.15 kHz, 15 kHz) Maximum Input Level +21 dBu Crosstalk < -80dB (ref. 1 kHz, at 100 W/4 ohm) Frequency Response 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced 20 kohm Signal-to-Noise Ratio (A-weighted) >104dB Output Noise , A-weighted <-68dBu Output Stage Topology Class AB Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption 550 W (1/8 Maximum Output Power @4 ohm) Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling Front-to-rear, 3-stage-fans Safety Class I Available Color Black Height 88mm (3.46") Width 483mm (19.02") Depth 462.4mm (18.2") Weight Net 12.9kg (28.44 lbs) Signal Processing FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance High Impedance Operation 70 V Operation; 100 V Operation Mains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH Operating Temperature Range +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion < 0.05% (at 450 W/4 ? MBW = 80 kHz, 1 kHz)