APART MA200

The MA200 is a very compact, professional PA mixing amplifier for commercial and industrial applications. The MA200 can drive 8 Ohm or constant voltage loudspeakers. The MA200 has 4 microphone inputs with integrated speech filters, 4 selectable line inputs and one emergency line / telephone input. MIC input 1 is meant to be the main microphone paging input. Its signal can be fed via the front jack or via the XLR3, DIN5 or Euroblock connector at the back. When needed, two APart paging microphones (MIC-PAT-D) can be wired in parallel on each microphone input. The MA200 has a 3-level priority system. The emergency line / telephone input at the back has the highest priority. MIC1 has the second priority level and the third priority level can be activated by a dry contact at the back of the amplifier. This dry contact mutes all background music inputs and activates the integrated chime. The level of the chime can be adjusted. Activation of the dry contact, releases a 24V output power - for switching the relays of loudspeaker attenuators or other devices. • Input : MIC1 (Front / Rear) : Bal. 1/4”Jack / Bal XLR, DIN5 (1.5mV), Euroblock. 14V phantom power via on-off switch at back panel • Input : MIC2-3-4 : XLR3 balanced (1.5 mV). 14V phantom power via on-off switch at back panel • Input : Emergency input : Euro block (1V) • Inputs : AUX & CD: RCA cinch (500 mV) • Input : Tuner : RCA cinch (300 mV) • Input : LINE4 : RCA cinch (200 mV) • Rated Output Power : 200 W • Output impedance : 50V (12.5Ohm) - 70V (24.5Оhm) - 100V (50Ohm) - 8 Ohm • Pre amp out : RCA (1V) • Record out : RCA mono (1V) • 24V priority output, activated by contact closure • 2-tone chime activated by contact closure • 3 Level Priority system • Dynamic limiter -3dB • Frequency Range : 40 Hz - 22 kHz (±3 dB) • S/N Ratio : Amplifier : >95 dB, 22 Hz - 22 kHz • Treble control : ± 10 dB, 10 kHz • Power supply : 230 / 115 V AC or 24V DC • Dimensions (H x W x D) : 88 x 430 x 356 mm • Weight : 12.1 kg