ADJ Fog Fury 3000

The ADJ Fog Fury 3000 is a 1500W professional DMX Fog Machine with new advances in technology. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance pump system for optimum output. ADJ’s Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with no warm-up time between fog blasts. The Fog Fury 3000 also has convenient features such as a LED heating indicator system that changes colors depending on whether the fogger is heating up, ready to use, or if the fog fluid is low. It also has built-in DMX control with a 3-button digital LCD display on the rear panel with 3 operational modes: Manual, DMX or built-in Timer Remote. Specifications - 1500W professional DMX Fog Machine - High performance pump for optimum output - ADJ’s Electronic Thermo Sensing (ETS) technology to always maintain optimum heat levels with no warm-up times between fog blasts - Automatic circuit cut-off to protect pump if fog fluid tank runs dry - Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging - LED heating indicator system in tank: Red = Heating; Green = Ready to use; Flashing = Fog fluid tank is low - 3 Operational modes: Manual, Timer Mode, or DMX Controlled - 3 DMX Channels - 3-button DMX LCD display on rear panel - 3-pin DMX XLR In/Out connections - Heater: 1500W - Fog Output: 21000 (cu.ft/min) - Warm-up time: 8 min. - External fog fluid tank: 5 Liter - Single yoke to mount on a wall or from trussing bracket - DMX-Timer remote FF23TR sold separately - Wireless remote control FF23WR sold separately - 1-button remote included - Convenient carrying handle - Power Consumption: 1600W max - Power: AC 120V/60Hz or 230V/50Hz (non switching) - Dimensions (LxWxH): 476x301x353mm - Weight: 11.9 kg - Only use high quality, water-based fog fluid Specifications subject to change without notice