DYNACORD LX 3000
-
Code:LX 3000
-
Weight:8.700 Kgs
Power Amplifiers 850-2000 Watt (4 ohm)
Load Impedance 2 O, 4 O, 8 O
Max. Midband Output Power, THD = 1%, 1kHz
2 O - 2100 W, 4 O - 1500 W, 8 O - 900 W
Rated Output Power, THD < 0.1%, 20Hz … 20kHz
W, 4 O - 1200 W, 8 O - 900 W
Max. Single Channel Output Power, Dynamic Headroom, IHF-A 2 O - 2900 W, 4 O - 1800 W, 8 O - 1000 W
Max. Single Channel Output Power, Continuous, 1kHz
2 O - 2600 W, 4 O - 1700 W, 8 O - 950 W
Max. Bridged Output Power, THD = 1%, 1kHz
W, 4 O - 4200 W, 8 O - 3000 W
Maximum RMS Voltage Swing, THD = 1%, 1kHz
95 V
Power Bandwith, ref. 1kHz, THD =1%, half power @ 4 ohms 10Hz … 60kHz
Voltage Gain, ref. 1kHz 32.0 dB
Input Sensitivity, rated power @ 8 ohms, 1kHz +7.0 dBu (1.74 V rms)
THD at rated output power, MBW = 80kHz, 1kHz
< 0.05%
IMD-SMPTE, 60Hz, 7kHz < 0.02%
DIM 30, 3,15kHz, 15kHz < 0.05%
Maximum Input Level +22 dBu (9.76 V rms)
Crosstalk, ref. 1kHz, at rated output power < -80 dB
Frequency Response, ref 1kHz ,15Hz … 40kHz (-1dB)
Input Impedance, active balanced 20 kohms
Damping Factor, 1kHz > 300 Slew Rate 38 V/µs
Signal to Noise Ratio, A-weighted 108 dB
Output Stage Topology Class H
Power Requirements
100V, 120V, 220V, 230V, 240 V; 50Hz … 60Hz (factory configured)
Power Consumption, 1/8 max. output power @ 4 hms
1070 W
Protection Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak current Limiters Inrush Current Limiters, Turn-On delay
Cooling Front-to rear, 3-stage fans
Ambient Temperature Limits
+5° … +40° ( 40°F … 105°F ) Safety Class I
Dimensions ( W x H x D ) mm 483 x 88.1 x 384
Weight 8.70 kg (19.2 lbs)
