Proel PA AMP160XL

Thanks to the use of power supply switching with SMPS (switch mode power supply) technology and to the constant voltage output 70/100V obtained electronically without transformers, it was possible to design the amplifier in only one rack unit, succeeding in containing the weight and size.

Features:

• Speakers Overload and Short-Circuit Protection Circuit
• Led Start-Up Indicator
• Led Level Indicator
• Volume General Control (Master)
• Controls Separated By Level for the 1 to 5 Inputs
• Low and High Pitch Adjustment
• Illuminated Knobs
• 4 MIC / MIC Phantom 48V / LINE Inputs Balanced On Euroblock Terminal
• 3 AUX Switchable Inputs from Front Selector
• 1 to 4 Inputs With Independent Priority Function (VOX / Contact)
• Function MAIN - IN/OUT
• 3 Outputs, One at Constant 4? Impedance and Two at Constant Voltage (70/100V)
• CHIME Function Independent for Each Input (Routing)
• REC OUT Output on RCA
• Line Level Output Balanced On Euroblock Terminal
• 230/117V 50/60Hz Autoswitch Power Supply
• 2U 19" Rack Adapters

Technical Specifications:

• Output Power RMS: 160 W
• Inputs: 4 x MIC/LINE Balanced, 2 x AUX (Selectable), 1 x MAIN IN (Normally Connected to PRE OUT)
• Input Sensitivity: MIC -40dBV / 600 Ohms Balanced (with 48V Phantom), LINE 0dBV / 100 kOhms Balanced , AUX 0dBV / 47 kOhms Unbalanced, MAIN IN 0dBV / 10KOhms Unbalanced
• Signal Output: PRE OUT (Normally Connected to MAIN IN), PRE OUT: 1V / 600 Ohms, REC OUT: 1V / 600 Ohms, BAL OUTPUT: 1V / 600 Ohms
• Controls: MASTER VOLUME CONTROL, 1 TREBLE TONE CONTROL, 1 BASS TONE CONTROL, 4 MIC/LINE VOLUME CONTROLS, 1 AUX VOLUME CONTROL
• Loudspeakers Outputs: 100/70V/4 Ohms
• Frequency Response: 80Hz -16KHz (-3dB)
• Distortion (THD): < 0.5% (@ Pnom 1kHz)
• S/N Ratio MIC >/= 70dB, LINE >/= 70dB, AUX >/= 80dB
• Power Supply: Autoswitch 100-240V~ 50/60Hz
• Input/Output Connectors: Terminal Block - RCA
• Power Consumption: 160VA
• Dimensions (LxHxP): 483x44x278 mm - 1U
• Weight: 5 kg