Electro-Voice TG5

Tour Grade amplifiers have a microprocessor controlled operation management system that provides useful features like compound thermal management automatic mains voltage detection. The TG5 uses grounded bridge, two-step, class-H topology to ensure the highest acoustic performance and reliability. The TG Series also offers power and transient response to drive subwoofers, along with low distortion for critical HF signals. The high-capacity switchmode power supply provides the headroom needed to ensure high dynamic outputs and reliable operation on extreme low loads.

Amplifier Gain 41.5 dB, 35 dB, 32 dB (switchable)
CAN Bus Interface Optional with RCM-26
Continuous Rated Power
(1 kHz, THD 1%) 2 Ohm 2000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4 Ohm 1450 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8 Ohm 850 Watts
Continuous Rated Power
(20-20 kHz, THD<0,2%) 4Ohm 1200 Watts
Continuous Rated Power
(20-20 kHz, THD<0,2%) 8Ohm 600 Watts
Control Protocol CAN-Bus (with RCM 26 module)
Digital Inputs Optional with RCM-26
DIM 30 0.02 %
Electronics Type Amplifier
FIR-Drive Optional with RCM-26
GPIO Control Port Optional with RCM-26
Input Impedance (Balanced) 20 kOhm
Input Sensitivity 0 dBu / 4 dBu / 9 dBu (switchable)
Intermodulation Distortion (SMPTE) 0.05 %
Maximum Bridged Output 4Ohm 3800 Watts
Maximum Bridged Output 8Ohm 2900 Watts
Network Control (IRIS-Net) Optional
Signal-to-Noise Ratio (A-weighted) 109 dB
Slew Rate 30 V/µs
Total Harmonic Distortion 0.05 %
Height 2RU 88.1 mm
Width 483 mm
Depth 512 mm
Weight Net 14.2 kg