IK Multimedia iRig Stomp I/O
-
Code:iRig Stomp I/O
-
Weight:1.500 Kgs
iRig Stomp I/O • USB Pedalboard Controller/Audio Interface for iOS, Mac, PC
Quick Buy
Specifications:
• Conversion: 24-bit A/D, 24-bit D/A
• Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
• Power: USB or DC IN
• Device Connection: USB B-Type and Mini-DIN
• Enclosure: Metal Sheet
Microphone In:
• Connector: Balanced Female 3-Pin XLR
• Input Level: from 6 mVpp to 1.4 Vpp
• Input Impedance: approx 2 kOhms
• Gain Range: approx 48 dB
• Phantom Power: +48V +/- 4V
• Frequency Response: 20 Hz – 20kHz +/-1.5dB
• Input Noise: -103 dB(A), -97 dB RMS
Instrument In:
• Connector: Unbalanced, Hi-Z, TS 1/4" Jack
• Input Level: from 30mVpp to 6.9Vpp
• Input Impedance: 1MOhms
• Gain Range: approx 27dB
• Frequency Response: 20 Hz – 20kHz +/-1.5dB
• Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Out:
• Connector: 1/8" TRS Jack
• Level Control: Numbered Thumbwheel
• Output Power: 100mW into 50 Ohms
Stereo Line Out:
• Connector: 2x Balanced Female 1/4" TRS Jack
• Maximum Output Level: +16 dBu into 600 Ohms Balanced Load
• Output Impedance: 150 Ohms Balanced
• Floating Balanced Outputs
• MIDI Input/Output Connector: 2x 5-pin DIN
Top Panel Connections:
• 4x Metal Foot-Switches
• 2x Analog Potentiometers for Input GAIN and Output VOLUME
• "Stomp MODE" LED
• "Phantom 48V" LED
• "PEDAL" LED
• 4 Segments Mono Input Level Meter (Peak)
• 4 Segments Device Output Meter
• Continuous Pedal (Expression Pedal) with Virtual Switch at the Top of its Travel
Rear Panel Connections:
• Neutrik Combo Socket for MIC Input and Instrument Input
• +48V Phantom Power Switch
• 1/4" Headphones Output
• 2x 1/4" TRS Balanced Floating Line Outputs
• MIDI I/O 5-Pin DIN Connectors
• 2x 1/4" TRS External Controllers Sockets
• B-Type USB Socket for Connecting a Computer (Mac/PC)
• Mini-DIN "iOS" Connector for Connecting an iOS Device
• Barrel DC-in Socket for Powering Up
