Installation DSP amplifier,
- Купете или друг продукт от нашата промоционална секция за да получите 5% отстъпка.
Fully integrated professional speaker processing with FIR Drive technology Market leading acoustic performance and rock solid reliability Low Z and 70/100V operation and power saving standby mode Intuitive system control software, makes setup and control easy Load Impedance 2? 2.6? 4? 8? Maximum Output Power, SIngle Channel 2?:1600W; 2.6?: 1300W; 4?: 950W 8?: 480W Maximum Output Power, Dual Channel Load Impedance: 2?=1400W; 2.6?=1200W; 4?=850W; 8?=450W; High Impedance: 70V Operation=2x 1250W; More Specifications Maximum Output Power, Bridged Load Impedance: 4 ohm=2800W; 8 ohm=1700W; High Impedance: 70V Operation=1x 600W; 100V Operation=1x 1250W Maximum RMS Voltage Swing, THD = 1%, 1kHz 65.1V Voltage Gain ref.1kHz 32.0dB IMD-SMPTE, 60 Hz, 7 kHz <0.1% DIM 30 <0.05% (3.15 kHz, 15 kHz) Maximum Input Level +21dBu Crosstalk < -80dB (ref. 1 kHz, at 100 W/4 ohm) Frequency Response 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced 20kohm Signal-to-Noise Ratio (A-weighted) >105dB Output Noise , A-weighted <-68dBu Output Stage Topology Class AB Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz Power Consumption 700W (1/8 Maximum Output Power @4ohm) Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling Front-to-rear, 3-stage-fans Safety Class I Available Color Black Height 88mm (3.46") Width 483mm (19.02") Depth 462.4mm (18.2") Weight Net 15.2kg (33.51 lbs) Signal Processing FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH Operating Temperature Range +5°C to +40°C (40°F to +105°F) Remote Power ON/GPIO Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection Total Harmonic Distortion <0.05% (at 600 W/4ohm MBW = 80 kHz, 1 kHz)