DYNACORD H 5000
-
Код:H 5000
-
Тегло:14.500 кг
Усилвател на мощност
Бърза поръчка без регистрация
Load Impedance 2O, 4O, 8O
Maximum Midband, Output Power, 1 kHz, THD=1%
2O - 3500 W, 4O - 2500 W, 8O - 1500 W
Rated Output Power, 20 Hz ... 20 kHz, THD <0.1%
4O - 2100 W, 8O - 1050 W
Max. Single Channel, Output Power, Dynamic-Headroom, IHF-A
2O - 4500 W, 4O - 3200 W, 8O - 1800 W
Max. Single Channel, Output Power, Continuous,1kHz
2O - 4100 W, 4O - 2700 W, 8O - 1600 W
Maximum Bridged, Output Power, 1 kHz, THD=1% 4O - 7000 W, 8O - 5000 W
Maximum RMS, Voltage Swing, 1 kHz, THD=1% 125 V
Power Bandwidth, THD=1%, ref. 1kHz, half power @ 4O / 10 Hz ... 50 kHz
Voltage Gain, ref. 1 kHz
41dB / 35 dB / 32 dB (switchable)
Input Sensitivity, at rated output power @ 8O, 1 kHz
0 dBu / 6 dBu / 9 dBu (switchable)
THD at rated output power, MBW=80kHz, 1 kHz < 0.05 %
IMD-SMPTE, 60 Hz, 7 kHz < 0.05 %
DIM 30, 3.15 kHz, 15 kHz < 0.02 %
Max. Input Level
+22 dBu (9,75 Vrms)
Crosstalk, ref. 1 kHz at rated output power < -80 dB
Frequency Response, ref. 1 kHz < 10 Hz ... 30 kHz (± 1dB)
Input Inpedance, active balanced 20 kO
Damping Factor ,1kHz > 400
Slew Rate 35 V/µs
Signal to Noise Ratio Amplifier, A-weighted, 32 dB constant gain 111 dB
Output Noise , A-weighted < -70 dBu
Output Stage Topology
Class-H Grounded Bridge
Power Requirements
100 V - 240 V, 50 Hz - 60 Hz; 100 V, 50 Hz - 60 Hz
Power Consumption, at 1/8 maximum output power @ 4 O / 1450 W
Protections
Audio limiters, High temperature, DC, HF, Short Circuit, Back-EMF, Peak current limiters, Inrush current limiters,Turn-on delay, Mains Circuit Breaker Protection, Mains Overvoltage Protection
Cooling
Front-to-Rear, 5-stage-fans Ambient Temperature Limits +5°C ... +40°C (40°F ... 105°F) Safety Class I
Dimensions (WxHxD), mm
483 x 88.1 x 498
Weight 14.5 kg
