RODE VideoMic Pro

The RODE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.

At the heart of the VideoMic Pro is a high resolution 1/2" condenser capsule that provides broadcast quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels). A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.

An innovative suspension system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. A lightweight and flexible yet robust multi-strand cable provides significantly lower noise transference than traditional audio cable while ensuring a high definition signal.

Specs:

• Acoustic Principle: Line Gradient
• Active Electronics: JFET impedance converter
• Capsule: 0.50"
• Polar Pattern: Supercardioid
• Address Type: End
• Frequency Range: 40Hz - 20kHz
• Output Impedance: 200Ohm
• Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KOhm load)
• Maximum Output Level: 6.9dBu (@ 1kHz, 1% THD into 1K? load)
• Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
• Equivalent Noise Level (A-weighted): 20dB-A
• Power Options: 9V Battery (Over 70 hours operation from 9V alkaline battery)
• Weight: 85.00gm
• Dimensions: 95.00mmH x 43.00mmW x 150.00mmD
• Output: Minijack Output