AKG C 519 ML
-
Code:C 519 ML
-
Weight:0.400 Kgs
Miniature condenser clip-on microphone for wind instruments, drums, and percussions
Quick Buy
Miniature gooseneck for accurate microphone alignment
Including wireless direct adapter for easy use with AKG pocket transmitters
Detachable microphone cable
Transducer shock mount for high mechanical-noise rejection
The C 519 clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound.
The C 519 M features an integrated, switchable bass cut for adjusting the microphone’s frequency response to your instrument's sound. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters.
C 519 ML for use with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.
Polar pattern cardioid
Frequency range 60 Hz to 20 kHz
Sensitivity 5 mV/Pa (-46 dBV)
Max. SPL 130/132 dB SPL (for 1 %/3 % THD)
Equivalent noise level 31 dB(A)
Signal/noise ratio (A-weighted) 63 dB
Impedance <= 200 ohms
Recommended load impedance >= 2000 ohms
Powering <= 2 mA
Power requirement B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
Connector 3-pin mini XLR
Cable 1.5 m (5 ft.)
Finish matte black
Dimensions Length: 213 mm (microphone only); max. width: 47 mm
Net weight C 519 M: 195 g
C 519 ML: 85 g (microphone and cable)
Shipping weight C 519 M: 430 g
C 519 ML: 310 g
Included:
- A 400 Adapter
- Protective bag
- W 44 Windscreen
